Installation of the mechanical supercharger kit

The method of mounting the supercharger kit strict code, after adding special oiler oil, low temperature oil flow through the filter into the supercharger, is pumped out of the oil through the oil cooler back oiler cycle. Turbocharger installation must comply with the same, which is engraved with this side down side to the level below, because the oil pump and the oil inside the design of the decision. Also does not limit the turbine (part of the compressed gas, snails), can be used individually rotate 360 degrees every 60-degree angle is a fixed position, with six blow angle to match different engines evo x crankshaft. Economic use TRUST GReddy e-Manage Ultimate plug the computer has become the mainstream, more popular than its predecessor, Blue E-Manage, is most preferred to use modified street cars, tuning air-fuel ratio and ignition timing can meet the demand, break off oil to bring the number of revolutions also hand. Horsepower and testing process, Defi boost the value of BF meter record up to nearly instantaneous pressure 1.1bar This is turn the engine 1.5 dci turbo over 6000 when the booster produced daily accelerated pressure between 0.4 ~ 0.7bar. (1bar = 100kPa) actually boost pressure and engine speed unison. From left to right respectively function display oil pressure, oil temperature, water temperature. After a nearly hour-horsepower test machine, the oil temperature is 80 ℃ temperature 70 ℃, the actual highway driving one hour exercise habits during the oil temperature 85 ℃ temperature 80 ℃ very stable under the conditions of the original car and the engine peugeot racing parts is similar to the work running durability unchanged.